How Does a Beer Keg Tap Work?
Whenever family and friends have a party or go out for a picnic, they usually have beer kegs available. People who are thirsty drink a lot and so it is very cost effective to have a keg in the available since it also saves you a lot of money. The device that allows you to release the beer into your drinking cup from the keg is a keg tap. If you do not know how to use a keg tap, then you can waste a lot of beer, and this is why you need to be careful is using it since it is actually easy to use. Improper use of the keg tap can let foam go all over your face or all over you. You would see people doing this but it is not as easy as it looks.
The release of the beer is regulated by the keg tap. This uses a lever and through pulling and pressing it, the beer is released. When pressure is released, it pushes the beer up and into the glass. Keg taps work like switches which you can put on or off or it can also be an open-close switch.
With the beer key directly In front of you, you need to place the beer keg in a stead position for a short while so that the foam it creates when pouring is minimized. The foam builds up when the keg is transported especially when there is too much movement. Let it stay for a while and place the keg where you plan to serve the beer to minimize the foam. It is harder to tap with the cap or seal so you should remove it. However, the pros do not remove the cap or seal because they will not put the beer at risk like you will. If you will do it, you need to play it safe.
With a portable keg system, you tap with CO2. The keg receives pressure in a single unit pump and tap combination and this is called party pump. IN this type, the keg and the beer keg tap are separated. To release the pressure in the ked, the pump is attached and the faucet is opened. You can release beer by applying air pressure to the keg by pumping and pushing the lever or the tap handle.
When beer is mixed with air, it begins to lose its flavor and this is the reason why a pony keg or a portable keg should be consumed in a single day when the beer already loses its flavor. In a traditional keg and on and off valve is used. This types works by gravity and there is no need for air pressure. The traditional keg valve simply needs to be opened or closed to get your beer.